29.180 - Transformers. Reactors

This document applies to medium power transformers from 25 kVA up to 3 150 kVA with highest
voltage for equipment up to 36 kV, or in low voltage (LV) networks with highest voltage for
equipment of up to 1,1 kV equipped with voltage regulating devices.
Voltage regulating distribution transformers are transformers equipped with components to
control primary or secondary voltage for on-load voltage regulation purposes.
The main objective of the installation of a VRDT is to regulate the LV netw...view more

This document describes a number of tests for use in determining the significant parameters
and performance characteristics of transformers and inductors for use in electronics and
telecommunication equipment. These test methods are designed primarily for transformers
and inductors used in all types of electronics applications that can be involved in any
specification for such components. Even though these tests can be useful to the other types
of transformers used in power distribution app...view more

This part of IEC 60076-22 applies to a selection of accessories and fittings mounted on liquid
immersed power transformers according to IEC 60076-1 and reactors according to IEC 600766
with or without conservator for indoor or outdoor installation. It outlines the service conditions
and the mechanical requirements that are common to all the accessories and fittings.
This document also outlines the operation requirements specific to each device as well as the
preferred dimensions relevant fo...view more

IEC 61007:2020 describes a number of tests for use in determining the significant parameters and performance characteristics of transformers and inductors for use in electronics and telecommunication equipment. These test methods are designed primarily for transformers and inductors used in all types of electronics applications that can be involved in any specification for such components. Even though these tests can be useful to the other types of transformers used in power distribution applica...view more

IEC 60076-24:2020 applies to medium power transformers from 25 kVA up to 3 150 kVA with highest voltage for equipment up to 36 kV, or in low voltage (LV) networks with highest voltage for equipment of up to 1,1 kV equipped with voltage regulating devices. Voltage regulating distribution transformers are transformers equipped with components to control primary or secondary voltage for on-load voltage regulation purposes. The main objective of the installation of a VRDT is to regulate the LV netwo...view more

The scope of this document is to define the energy performance of Medium Power Transformers in compliance with prEN 50708-1-1:2019.

The scope of this document is to define performance requirements of Large Power Transformers in compliance with prEN 50708 1 1:2019.
NOTE    This document covers the transformers under the EU Regulation N. 548/2014 and Amendment of 2019, gives additional specific guidance for single phase transformers, autotransformers, multi winding transformers and for transformers with OD and OF cooling systems, necessary for the correct application of energy efficiency requirements to these categories of tran...view more

This document is part of the of the EN 50708 series which applies to transformers in compliance with EN 60076 1.

IEC 60076-22-7:2020 applies to a selection of accessories and fittings mounted on liquid immersed power transformers according to IEC 60076-1 and reactors according to IEC 60076­6 with or without conservator for indoor or outdoor installation. It outlines the service conditions and the mechanical requirements that are common to all the accessories and fittings. This document also outlines the operation requirements specific to each device as well as the preferred dimensions relevant for intercha...view more

EN-IEC 62041 is applicable to transformers, reactors and power supply units covered by the IEC 61558 series of standards. This document deals with the electromagnetic compatibility requirements for emission and immunity within the frequency range 0 Hz to 400 GHz. No tests need to be performed at frequencies where no requirements are specified. For associated transformers, associated reactors and associated power supply units either supplied with or incorporated into an appliance or equipment the...view more

IEC 60895:2020 is applicable to conductive clothing, worn during live working (especially bare-hand working) on AC and DC electrical installations, to provide electrical continuity between all parts of the clothing and a reduction of electric field inside the clothing.
This document is applicable to conductive clothing assembled from a conductive garment (jackets and trousers or coveralls forming a one-piece garment) and from conductive component parts (gloves, hoods or helmets, shoes or boots,...view more

IEC TR 60076-26: 2020 which is a Technical Report, provides the functional requirements of insulating liquids that are considered necessary for use in power transformers, including, for example, reactors and HVDC transformers, are assembled and listed. A relevance index of importance for design and for service as well as the status of validation is given for all individual requirements (parameters). All parameters are assigned to one of the following categories:
General (physical / chemical) ...view more

IEC 62041: 2017(E) is applicable to transformers, reactors and power supply units covered by the IEC 61558 series of standards. This document deals with the electromagnetic compatibility requirements for emission and immunity within the frequency range 0 Hz to 400 GHz. No tests need to be performed at frequencies where no requirements are specified. This third edition cancels and replaces the second edition published in 2010. It constitutes a technical revision. This edition includes the followi...view more

This document describes a process to demonstrate compatibility between Rolling Stock (RST) and Train Detection Systems (TDS). It describes the characterization of train detection systems, rolling stock and traction power supply systems. It is worth noting that the demonstration of technical compatibility between the rolling stock and infrastructure with respect to physical dimensions is not detailed in this document. This document is not generally applicable to those combinations of rolling stoc...view more

This standard applies to radiators mounted on liquid immersed power transformers according to IEC 60076-1 and reactors according to IEC 60076-6 with and without conservator for indoor or outdoor installation. It outlines the service conditions and the mechanical and electrical requirements that are common to this equipment. It also outlines the operation requirements specific to this equipment as well as the preferred dimensions relevant for interchangeability and the type and routine tests to b...view more

This standard applies to liquid to air heat exchangers, using forced air and forced liquid circuits, used on liquid immersed power transformers according to IEC 60076-1 and reactors according to IEC 60076-6 with and without conservator for indoor or outdoor installation. It outlines the service conditions and the mechanical and electrical requirements that are common to this equipment. It also outlines the operation requirements specific to this equipment as well as the preferred dimensions rele...view more

This standard applies to liquid to water heat exchangers, using forced water and forced liquid circuits, used on liquid immersed power transformers according to IEC 60076-1 and reactors according to IEC 60076-6 with and without conservator for indoor or outdoor installation. It outlines the service conditions and the mechanical and electrical requirements that are common to this equipment. It also outlines the operation requirements specific to this equipment as well as the preferred dimensions ...view more

This part of IEC 63093 specifies the dimensions that are of importance for mechanical
interchangeability for a preferred range of EP-cores made of ferrite, the essential dimensions
of coil formers to be used with them and the locations of their terminal pins on a 2,50 mm
printed wiring grid in relation to the base outlines of the cores and the effective parameter
values to be used in calculations involving them. It also gives guidelines on allowable limits of
surface irregularities applicab...view more