Cycles - Electrically power assisted cycles - EPAC Bicycles

This European Standard applies to EPAC bicycles for private and commercial use with exception of EPAC intended for hire from unattended station.
This European Standard is intended to cover all common significant hazards, hazardous situations and events (see Clause 4) of electrically power assisted bicycles, when used as intended and under condition of misuse that are reasonably foreseeable by the manufacturer.
This European Standard is intended to cover electrically power assisted bicycles of a type which have a maximum continuous rated power of 0,25 kW, of which the output is progressively reduced and finally cut off as the EPAC reaches a speed of 25 km/h, or sooner, if the cyclist stops pedalling.
This European Standard specifies requirements and test methods for engine power management systems, electrical circuits including the charging system for the design and assembly of electrically power assisted bicycles and sub-assemblies for systems having a rated voltage up to and including 48 V d.c. or integrated battery charger with a nominal 230 V a.c. input.
This European Standard specifies safety and safety related performance requirements for the design, assembly, and testing of EPAC bicycles and subassemblies intended for use on public roads, and lays down guidelines for instructions on the use and care of such bicycles.
This European Standard applies to EPAC bicycles that have a maximum saddle height of 635 mm or more and that are intended for use on public roads.
This European Standard is not applicable to EPACs which are manufactured before the date of its publication as EN.

Fahrräder - Elektromotorisch unterstützte Räder - EPAC

Cycles - Cycles à assistance électrique - Bicyclettes EPAC

La présente Norme européenne s’applique aux bicyclettes à assistance électrique (EPAC) à usage privé et commercial, à l'exception des cycles destinés à la location dans une station sans surveillance.
La présente Norme européenne est destinée à traiter de tous les phénomènes dangereux significatifs, situations et événements dangereux (voir Article 4) relatifs aux bicyclettes à assistance électrique, lorsqu'elles sont utilisées dans des conditions normales et dans des conditions de mauvaise utilisation raisonnablement prévisibles par le fabricant.
La présente Norme européenne s’applique aux bicyclettes à assistance électrique d’une puissance nominale continue maximale de 0,25 kW, dont l’alimentation est réduite progressivement et finalement interrompue lorsque la bicyclette atteint une vitesse de 25 km/h, ou plus tôt, si le cycliste arrête de pédaler.
La présente Norme européenne spécifie les exigences et les méthodes d’essai relatives aux systèmes de gestion de la puissance du moteur, aux circuits électriques y compris au système de chargement pour la conception et l’assemblage des bicyclettes à assistance électrique et des sous-ensembles dédiés à des systèmes présentant une tension nominale allant jusqu’à 48 Vdc inclus ou intégrant un chargeur de batterie avec une entrée de 230 Vac nominal.
La présente Norme européenne spécifie les exigences de sécurité et de performance liée à la sécurité à observer lors de la conception, de l’assemblage et des essais des bicyclettes à assistance électrique destinées à une utilisation sur la voie publique et de leurs sous-ensembles, et précise les lignes directrices concernant l'utilisation et l'entretien de celles-ci.
La présente Norme européenne s'applique aux bicyclettes à assistance électrique destinées à une utilisation sur la voie publique sur lesquelles la selle peut être réglée pour offrir une hauteur maximale de selle supérieure ou égale à 635 mm.
La présente Norme européenne n'est pas applicable aux EPAC qui sont fabriqués avant la date de sa publication comme EN.

Kolesa - Kolesa z električnim pomožnim pogonom - Kolesa EPAC

Ta evropski standard je namenjen obravnavi koles z električnim pomožnim pogonom, ki imajo največjo trajno nazivno moč 0,25 kW, pri čemer se izhodna moč postopno zmanjšuje in končno prekine, ko vozilo doseže hitrost 25 km/h ali prej, če kolesar preneha poganjati pedale. Ta evropski standard določa varnostne zahteve in preskusne metode za oceno načrta in montaže koles z električnim pomožnim pogonom ter podsklopov za sisteme, ki uporabljajo akumulator z enosmerno napetostjo do 48 V ali integrirani polnilnik akumulatorja z vhodno močjo 230 V. Ta evropski standard določa zahteve in preskusne metode za sisteme upravljanja porabe motorja, električne tokokroge, vključno s sistemom polnjenja, za oceno načrta in montaže koles z električnim pomožnim pogonom ter podsklopov za sisteme, ki uporabljajo akumulator z enosmerno napetostjo do vključno 48 V ali integrirani polnilnik akumulatorja z vhodno močjo 230 V.

General Information

Status
Withdrawn
Publication Date
03-Oct-2017
Withdrawal Date
22-Aug-2023
Current Stage

Relations

Buy Standard

Standard
EN 15194:2017
English language
135 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 15194:2015
English language
133 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 15194:2017
01-december-2017
1DGRPHãþD
SIST EN 15194:2009+A1:2012
.ROHVD.ROHVD]HOHNWULþQLPSRPRåQLPSRJRQRP.ROHVD(3$&
Cycles - Electrically power assisted cycles - EPAC Bicycles
Fahrräder - Elektromotorisch unterstützte Räder - EPAC
Cycles - Cycles à assistance électrique - Bicyclettes EPAC
Ta slovenski standard je istoveten z: EN 15194:2017
ICS:
43.120 (OHNWULþQDFHVWQDYR]LOD Electric road vehicles
43.150 Kolesa Cycles
SIST EN 15194:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 15194:2017

---------------------- Page: 2 ----------------------

SIST EN 15194:2017


EN 15194
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2017
EUROPÄISCHE NORM
ICS 43.120; 43.150 Supersedes EN 15194:2009+A1:2011
English Version

Cycles - Electrically power assisted cycles - EPAC Bicycles
Cycles - Cycles à assistance électrique - Bicyclettes Fahrräder - Elektromotorisch unterstützte Räder -
EPAC EPAC
This European Standard was approved by CEN on 28 May 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15194:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 15194:2017
EN 15194:2017 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 9
4 Safety requirements and/or protective measures . 16
4.1 General . 16
4.2 Electrical requirements . 16
4.2.1 Electric circuit . 16
4.2.2 Controls and symbols . 16
4.2.3 Batteries . 16
4.2.4 Battery charger . 17
4.2.5 Electric cables and connections . 17
4.2.6 Wiring . 18
4.2.7 Pow
...

SLOVENSKI STANDARD
oSIST prEN 15194:2015
01-september-2015
.ROHVD.ROHVD]HOHNWULþQLPSRPRåQLPSRJRQRP.ROR.(33
Cycles - Electrically power assisted cycles - EPAC Bicycles
Fahrräder - Elektromotorisch unterstützte Räder - EPAC
Cycles - Cycles à assistance électrique - Bicyclettes EPAC
Ta slovenski standard je istoveten z: prEN 15194
ICS:
43.120 (OHNWULþQDFHVWQDYR]LOD Electric road vehicles
43.150 Kolesa Cycles
oSIST prEN 15194:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 15194:2015

---------------------- Page: 2 ----------------------
oSIST prEN 15194:2015

EUROPEAN STANDARD
DRAFT
prEN 15194
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2015
ICS 43.120; 43.150 Will supersede EN 15194:2009+A1:2011
English Version
Cycles - Electrically power assisted cycles - EPAC Bicycles
Cycles - Cycles à assistance électrique - Bicyclettes EPAC Fahrräder - Elektromotorisch unterstützte Räder - EPAC
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 333.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15194:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 15194:2015
prEN 15194:2015 (E)
Contents Page
Foreword .7
Introduction .8
1 Scope .9
2 Normative references .9
3 Terms and definitions . 10
4 Safety requirements and/or protective measures . 17
4.1 General . 17
4.2 Electrical requirements . 18
4.2.1 Electric circuit . 18
4.2.2 Controls and symbols . 18
4.2.3 Batteries . 18
4.2.4 Battery charger . 19
4.2.5 Electric cables and connections . 19
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.