CEN/TS 17638:2021
(Main)Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
This document specifies the reference method for the determination of the concentration of formaldehyde in emissions from stationary sources. Waste gas samples are taken by absorption in water and subsequently analysed by spectrophotometry or HPLC. The method applies to waste gases in which the formaldehyde concentration is 2 mg/m3 to 60 mg/m3, on dry basis, at the reference conditions of 273 K and 101,3 kPa.
The specific components and the requirements for the measuring system are described. A number of performance characteristics with associated minimum performance criteria are specified for the measuring system.
Emissionen aus stationären Quellen - Manuelles Verfahren zur Bestimmung der Massenkonzentration von Formaldehyd - Referenzverfahren
Dieses Dokument legt das Referenzverfahren für die Bestimmung der Formaldehydkonzentration in Emissionen aus stationären Quellen fest. Abgasproben werden durch Absorption in Wasser genommen und anschließend mit Spektralphotometrie oder HPLC analysiert. Das Verfahren ist anwendbar für Abgase, bei denen die Formaldehydkonzentration, bezogen auf trockenes Abgas und bei den Referenzbedingungen 273 K und 101,3 kPa, zwischen 2 mg/m3 und 60 mg/m3 liegt.
Die einzelnen Komponenten und die Anforderungen an die Messeinrichtung werden beschrieben. Für die Messeinrichtung werden Leistungskenngrößen und zugehörige Mindestleistungskriterien angegeben.
Emissions de sources fixes – Méthode manuelle pour la détermination de la concentration massique en formaldéhyde – Méthode de référence
Emisije nepremičnih virov - Določevanje masne koncentracije formaldehida - Ročna metoda
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 17638:2021
01-september-2021
Emisije nepremičnih virov - Določevanje masne koncentracije formaldehida -
Ročna metoda
Stationary source emissions - Determination of the mass concentration of formaldehyde
- Manual method
Emissionen aus stationären Quellen - Manuelles Verfahren zur Bestimmung der
Massenkonzentration von Formaldehyd - Referenzverfahren
Emissions de sources fixes - Détermination de la concentration massique en
formaldéhyde - Methode manuelle
Ta slovenski standard je istoveten z: CEN/TS 17638:2021
ICS:
13.040.40 Emisije nepremičnih virov Stationary source emissions
SIST-TS CEN/TS 17638:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 17638:2021
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 17638:2021
CEN/TS 17638
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
June 2021
TECHNISCHE SPEZIFIKATION
ICS 13.040.40
English Version
Stationary source emissions - Manual method for the
determination of the mass concentration of formaldehyde
- Reference method
Emissions de sources fixes - Méthode manuelle pour la Emissionen aus stationären Quellen - Manuelles
détermination de la concentration massique en Verfahren zur Bestimmung der Massenkonzentration
formaldéhyde - Méthode de référence von Formaldehyd - Referenzverfahren
This Technical Specification (CEN/TS) was approved by CEN on 16 May 2021 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17638:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 17638:2021
CEN/TS 17638:2021 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Symbols and abbreviations . 11
5 Principle . 11
6 Sampling strategy. 11
6.1 General . 11
6.2 Non-isokinetic sampling . 12
6.3 Isokinetic sampling with a side stream . 12
7 Sampling equipment .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.