Latest Standards, Engineering Specifications, Manuals and Technical Publications

This document provides general requirements and recommendations on the principles, procedures, and methods for investigating incidents where there have been injuries, illnesses, damage to health, fatalities to consumers, damage to property or environmental damage related to the use of products, services or facilities by consumers.  
NOTE 1 These incidents can occur anywhere.
This document is applicable to any person or any organization of any size, whether it is public, private or community-based.
NOTE 2 This document is not limited to incidents while products, services or facilities are in use, but also includes incidents that occur when products, services or facilities are not in use, such as during transportation or storage by consumers.

New Work Item for the alignment of EN ISO/IEC 15421:2000 with  the identical adoption of ISO/IEC 15421:2010

ISO/TS 14265:2011 defines a set of high-level categories of purposes for which personal health information can be processed. This is in order to provide a framework for classifying the various specific purposes that can be defined and used by individual policy domains (e.g. healthcare organizations, regional health authorities, jurisdictions, countries) as an aid to the consistent management of information in the delivery of health care services and for the communication of electronic health records across organizational and jurisdictional boundaries.
The scope of application of ISO/TS 14265:2011 is limited to Personal Health Information as defined in ISO 27799, information about an identifiable person that relates to the physical or mental health of the individual, or to provision of health services to the individual.

This choreographies document describes ordering between Buyer and Seller where the Buyer wants to reach an agreement with the Seller about an order. It describes a series of activities that govern communication between the parties and refers to the specifications where information and rules that apply are described.
The various possible behaviours of the Seller and Buyer subsequent to the first order communication are conveyed by variants of this choreography that are described in 5.2.
Previous activities (e.g. cataloguing) and subsequent activities (e.g. invoicing) are outside the scope of this document. If performed electronically, their implementation is covered by other choreographies.
The identifier of this choreographies document is EN 17016-1:2022.
How to claim conformance to this choreography is described in 5.2.3.

This document provides specifications on business processes for exchanging an electronic product catalogues (“catalogues”) as part of the business processes in the post-award area and pre-award area (partially), so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification:
• Processes for submitting catalogues from the selling to the buying side;
• Processes for submitting catalogue-related data as part of tendering processes.
Transaction used in the specified choreographies are out of scope. These transactions are specified in the related transaction specification on “Catalogue Transactions”.

This document specifies requirements for hot-dip galvanized reinforcing steel in the form of products which meet the requirements of EN 10080 and subjected, where appropriate, to further processing, e.g. bars, bent bars, stirrups, products straightened from coils, products cut from bars, welded structures and any other components fabricated for use in the reinforcement of concrete.
This document does not apply to hot dip galvanized reinforcement for pre-stressing or components of these reinforcements.

This document specifies the dimensions, the method of sampling, the preparation of the test specimens and the conditions for performing the tensile test with waisted test specimens in order to determine the tensile energy welding factor.
A tensile test with waisted specimens can be used in conjunction with other tests (e.g. bend, tensile, tensile creep, macro, etc.) to assess the performance of welded assemblies, made from thermoplastics materials.
The test is applicable to co-axial or co-planar heated tool butt welded assemblies made from thermoplastics materials filled or unfilled, but not reinforced. It is not applicable to tubular assemblies with a nominal outside diameter less than 90 mm.

This document specifies the sizing of safety valves and bursting discs for gas/liquid two-phase flow in pressurized systems such as reactors, storage tanks, columns, heat exchangers, piping systems or transportation tanks/containers, see Figure 2. The possible fluid states at the safety device inlet that can result in two-phase flow are given in Table 1.
NOTE          The pressures used in this document are absolute pressures, not gauge pressures.

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573-3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573-3, and the temper designations are defined in EN 515.

IEC 60966-4-1:2024 is a blank detail specification that relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). The creation of a uniform layout and style of detail specifications is determined by the use of a blank detail specification pro forma. The detail specification may be prepared by a national organization, a manufacturer, or a user.

This document specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies. Three types of hoses and hose assemblies are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges: — ambient temperatures: −25 °C to +70 °C; — water temperatures during operation: 0 °C to +70 °C.

This document provides general requirements and recommendations on the principles, procedures, and methods for investigating incidents where there have been injuries, illnesses, damage to health, fatalities to consumers, damage to property or environmental damage related to the use of products, services or facilities by consumers. NOTE 1 These incidents can occur anywhere. This document is applicable to any person or any organization of any size, whether it is public, private or community-based. NOTE 2 This document is not limited to incidents while products, services or facilities are in use, but also includes incidents that occur when products, services or facilities are not in use, such as during transportation or storage by consumers.

This document specifies a method for the determination of carbon monoxide (CO) in the vapour phase of mainstream cigarette smoke collected with the smoking regime specified in ISO 4387.

This document describes a basic role and functional model for mobility services using low Earth orbit (LEO) satellite systems for ITS services. This document provides: a) a role and functional model using a LEO satellite system for mobility services; b) a description of the concept of operations (CONOPS), and the relevant role models; c) a conceptual architecture between actors involved; d) references for the key documents on which the architecture is based; e) a mobility service use case summary. In-vehicle control systems are not within the scope of this document. This document scope is limited to mobility services using physical and digital infrastructure. NOTE Physical infrastructure facilities include for example, battery charging facilities, dynamic charging facilities for battery electric vehicles, physical infrastructure markings, physical traffic regulation signs, mobility monitoring facilities, emergency response service support facilities, traffic operation control centre facilities, fee collection service facilities (e.g. road usage fee), battery electric vehicle charging facilities, online reservation and online mobility usage fee payment facilities, and other infrastructure platform facilities that support ITS mobility services.

This document provides an overview, risk assessment, minimum security requirements and extended security guidelines for code-scanning payment in which the payer uses a mobile device to operate the payment transaction. This document is applicable to cases where the payment code is used to initiate a mobile payment and presented by either the payer or the payee. The following is excluded from the scope of this document: — details of payer and payee onboarding; — details of the supporting payment infrastructure, as described in 5.1.

This document specifies the evaluation methods for size and concentration indices of fine bubbles (FBs) generated through a nozzle. It only applies to FB dispersions (FBDs) in water generated through the nozzle. It describes the sampling method for a FBD from the nozzle into the retention container and the measurements of size and concentration indices. Major applications of the equipment include components of various industrial water systems and consumer baths and kitchens.

This document specifies test methods for the exoskeleton-type walking RACA robot used as medical electrical equipment which is intended to move from one location to another, by making reciprocating motion having intermittent contact with the travel surface. This document does not apply to passive or non-powered exoskeletons. NOTE These tests can be used to verify conformity with the requirements of IEC 80601-2-78.

This document specifies the determination of phytase activity in feeding stuff samples, including feed raw materials from plant origin, compound feeds (complete, complementary, mineral feeds), premixtures and feed additives. The method is applicable to, and is collaboratively validated for, the determination of phytase activity in complete feed, complementary feed including mineral feed, premixtures and feed additives. The method does not distinguish between phytase added as a feed additive and endogenous phytase already present in the feed materials. Therefore, the method is also applicable for feed materials from plant origin. The method does not apply to evaluating or comparing the in vivo efficacy of the phytase product. It is not a predictive method of the in vivo efficacy of phytases present on the market as they can develop different in vivo efficacy per unit of activity.

IEC 60034-2-1:2024 is available as IEC 60034-2-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60034-2-1:2024 is intended to establish methods of determining efficiencies from tests, and also to specify methods of obtaining specific losses. This document applies to DC machines and to AC synchronous and induction machines of all sizes within the scope of IEC 60034-1 rated for mains operation. These methods may be applied to other types of machines such as rotary converters, AC commutator motors and single-phase induction motors. This third edition cancels and replaces the second edition of IEC 60034-2-1 published in 2014. This edition includes the following significant technical changes with respect to the previous edition: - Harmonization of layout and requirements with IEC 60034-2-2 and IEC 60034-2-3.

IEC 60034-2-3:2024 specifies test methods and an interpolation procedure for determining losses and efficiencies of converter-fed motors. The motor is then part of a variable frequency power drive system (PDS) as defined in IEC 61800‑9‑2. This document also specifies procedures to determine motor losses at any load point (torque, speed) within the constant flux range (constant torque range, base speed range), the field weakening range and the overload range based on determination of losses at seven standardized load points. This procedure is applicable to any variable speed AC motor (induction and synchronous) rated according to IEC 60034-1 for operation on a variable frequency and variable voltage power supply. This second edition cancels and replaces the first edition of IEC 60034-2-3 published in 2020. This edition includes the following significant technical changes with respect to the previous edition: - Harmonization of requirements and procedures with IEC 60034-2-1. - Extension of the interpolation procedure to the field weakening range.

IEC 62368-1:2023 is available as IEC 62368-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62368-1:2023 is a product safety standard that classifies energy sources, prescribes safeguards against those energy sources, and provides guidance on the application of, and requirements for, those safeguards. The prescribed safeguards are intended to reduce the likelihood of pain, injury and, in the case of fire, property damage. The objective of the introduction is to help designers to understand the underlying principles of safety in order to design safe equipment. These principles are informative and not an alternative to the detailed requirements of this document.

2022-02-21: This prAA covers common mods to prEN IEC 62368-1 - PR=74334

IEC 60034-2-2:2024 applies to large rotating electrical machines and establishes additional methods of determining separate losses and to define an efficiency supplementing IEC 60034‑2‑1. These methods apply when full-load testing is not practical and results in a greater uncertainty. The specific methods described are: - Calibrated-machine method. - Retardation method. - Calorimetric method. - Summation of losses for permanent magnet excited synchronous machines. This second edition cancels and replaces the first edition published in 2010. This edition includes the following significant technical changes with respect to the previous edition: - Layout and procedures aligned with IEC 60034-2-1 and IEC 60034-2-3. - Annex A added: an informative procedure for the summation of losses for large permanent-magnet excited synchronous machines.

IEC 60966-4:2024 is a sectional specification that relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It specifies the design and construction, IEC type designation, workmanship, marking and packaging, standard rating and characteristics, electrical, mechanical and environmental requirements of finished semi-rigid cable assemblies, quality assessment, delivery and storage, etc. This part of IEC 60966 applies to semi-rigid cable assemblies composed of semi-rigid coaxial cables and coaxial connectors. Semi-rigid cable assemblies are widely used in mobile communication systems, microwave test equipment, radar, aerospace and other fields. NOTE 1 For the purpose of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not to individual and non-assembled parts thereof. NOTE 2 This sectional specification can be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests.

IEC 60966-2-2:2024 is a blank detail specification that relates to flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). The creation of a uniform layout and style of detail specifications is determined by the use of a blank detail specification pro forma. The detail specification may be prepared by a national organization, a manufacturer or a user.

IEC 61784-5-22:2024 specifies the installation profile for CPF 22 (AUTBUSTM [1]). The installation profile is specified in Annex A. This annex is read in conjunction with IEC 61918:2018, IEC 61918:2018/AMD1:2022 and IEC 61918:2018/AMD2:2024. [1] AUTBUSTM is the trade name of the Kyland Technology Co., Ltd. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of Kyland Technology Co., Ltd.

This document describes the methods that are available to perform a spectral analysis of a pavement surface profile. It specifies a method for performing spatial frequency analysis (or texture wavelength analysis) of two-dimensional surface profiles that describe the pavement texture amplitude as a function of the distance along a straight or curved trajectory over the pavement. It also details an alternative (non-preferred) method to obtain these spectra: a) constant-percentage bandwidth obtained by digital filtering (normative method); b) constant narrow bandwidth frequency analysis by means of discrete Fourier transform (DFT), followed by a transformation of the narrow-band spectrum to an octave- or one-third-octave-band spectrum (informative). The result of the frequency analysis will be a spatial frequency (or texture wavelength) spectrum in constant-percentage bandwidth bands of octave or one-third-octave bandwidth. The objective of this document is to standardize the spectral characterization of pavement surface profiles. This objective is pursued by providing a detailed description of the analysis methods and related requirements for those who are involved in pavement characterization but are not familiar with general principles of frequency analysis of random signals. These methods and requirements are generally applicable to all types of random signals; however, they are elaborated in this document for their use in pavement surface profile analysis. NOTE The spectral analysis as specified in this document cannot express all characteristics of the surface profile under study. In particular, the effects of asymmetry of the profile, e.g. the difference of certain functional qualities for “positive” and “negative” profiles cannot be expressed by the power spectral density, as it disregards any asymmetry of the signal (see Annex B).

This document specifies a test method for determining the liquid tightness of clothing for protection against rain, using a static manikin exposed to large amount of high energy droplets from above. It is applicable to the testing of jackets, trousers, coats and one- or two-piece suits. This document is not applicable to the testing of garments for resistance to other weather conditions, e.g. snow, hail-, or strong winds. NOTE For general background of the rain simulation, see Annex A.

This document specifies requirements for disposable extracorporeal blood and fluid circuits and accessories used in combination with haemodialysis equipment intended for extracorporeal blood treatment therapies such as, but not limited to, haemodialysis, haemodiafiltration, haemofiltration.
This document does not apply to:
—     haemodialysers, haemodiafilters or haemofilters;
—     plasmafilters;
—     haemoperfusion devices;
—     vascular access devices.
NOTE 1        Requirements for haemodialysers, haemodiafilters, haemofilters and haemoconcentrators are specified in ISO 8637-1.
NOTE 2        Requirements for plasmafilters are specified in ISO 8637-3.

This document specifies minimum requirements for the training of scientific divers to undertake scientific diving.
This document specifies evaluation criteria for these competencies.
This document specifies the requirements under which training is provided, in addition to the general requirements for recreational diving service provision according to ISO 24803.

This document specifies a volumetric method for the determination of silver on a material considered homogeneous. The silver content of the sample lies preferably between (100 and 999,0) parts per thousand (‰) by mass. Fineness above 999,0 ‰ can be determined using a spectroscopy method by difference (e.g. ISO 15096).
This method is intended to be used as the reference method for the determination of fineness in alloys covered by ISO 9202.

This document specifies a procedure for the determination of saturated and aromatic hydrocarbons (from C10 to C50) in vegetable fats and oils using the online-coupled high performance liquid chromatography-gas chromatography-flame ionization detection (HPLC-GC-FID). This document does not apply to other matrices.
The method is applicable for the analysis of mineral oil saturated hydrocarbons (MOSH) and/or mineral oil aromatic hydrocarbons (MOAH).
According to the results of the interlaboratory studies, the method has been proven suitable for MOSH mass concentrations above 3 mg/kg and MOAH mass concentrations above 2 mg/kg.
In case of suspected interferences, the fossil origin of the MOSH and MOAH fraction can be verified by examination by GC⨯GC-MS.
An alternative method for the epoxidation of the MOAH fraction (performic acid epoxidation) is proposed in Annex C. This alternative method provides comparable results to the ethanolic epoxidation of the MOAH fraction described in 8.6. This alternative method for epoxidation has proven to be efficient for samples with a high amount of interferences in the MOAH fraction (e.g. tropical oils).

This document specifies requirements and guidelines for systems and equipment used to evacuate plume generated by medical devices.
 This document applies to all types of plume evacuation systems (PESs), including
a)       portable;
b)       mobile;
c)        stationary, including dedicated central pipelines;
d)       PESs integrated into other equipment;
e)       PESs for endoscopic procedures (e.g., minimally invasive, laparoscopic)
This document applies to all healthcare facilities where PESs are used, including, but not limited to
a)       surgical facilities;
b)       medical offices;
c)        cosmetic treatment facilities;
d)       medical teaching facilities;
e)       dental clinics;
f)         veterinary facilities.
This document provides guidance on the following aspects of PESs:
a)       importance;
b)       purchasing;
c)        design;
d)       manufacture;
e)       documentation;
f)         function;
g)       performance;
h)       installation;
i)         commissioning;
j)         testing;
k)       training;
l)         use;
m)     risk assessment;
n)       servicing;
o)       maintenance.
This document does not apply to the following:
a)       anaesthetic gas scavenging systems (AGSSs) which are covered in ISO 7396-2;
b)       medical vacuum systems which are covered in ISO 7396-1;
c)        heating, ventilation, and air-conditioning (HVAC) systems;
d)       aspects of laser safety other than airborne contamination; and
e)       aspects of electrosurgery, electrocautery, and mechanical surgical tools other than airborne contamination produced by such equipment resulting from interaction with tissue or materials.

This document supports the other standards in the EN 17149 series, in order to ensure consistency of terminology across the series. It describes the basic terms and definitions as well as general procedures for strength assessments of rail vehicle structures that are manufactured, operated and maintained in accordance with standards valid for rail system applications.
This document is applicable to all kinds of rail vehicles.
The assessment procedure is restricted to ferrous materials and aluminium.
This document does not define design load cases.
This document is not applicable for corrosive conditions or elevated temperature operation in the creep range.

This document specifies the main characteristics and associated test methods for assessing of poly(ethylene terephthalate) (PET) recyclates intended for use in the production of semi-finished/finished products.
It is intended to support parties involved in the use of PET recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastics wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.
This document is applicable without prejudice to any existing legislation.

This document specifies a method for the determination of the concentration of hydrochloric acid (HCl) and hydrofluoric acid (HF) in biomethane, after absorption on an alkali-impregnated quartz fibre filtre or in a sorbent trap, by ion chromatography (IC) with conductimetric detection.
The method is applicable to biomethane for concentration levels for HCl from 0,07 mg/m3 to 35 mg/m3 and for HF from 0,07 mg/m3 to 20 mg/m3.
Unless stated otherwise, all concentrations in this document are given under standard reference conditions (see ISO 13443). Other conditions can be applied.
This method is also applicable to biogas. This method is intended to support conformity assessment of biomethane and biogas according to specifications, such as the EN 16723 series.

ABSTRACT
This specification describes the required properties and test methods for high-solids content, cold liquid-applied elastomeric membrane with integral wearing surface for waterproofing building decks not subject to hydrostatic pressure. This specification does not include specific requirements for skid resistance or fire retardance, although both may be important in specific uses. The properties to which the materials will be tested upon for conformance are as follows: weight loss of base coat; low temperature crack bridging; adhesion-in-peel to cement mortar and plywood substrates after water immersion; chemical resistance after water, ethylene glycol, and mineral spirits exposure; weathering resistance, recovery from elongation, tensile retention, and elongation retention; abrasion resistance; and stability.
SCOPE
1.1 This specification describes the required properties and test methods for a cold liquid-applied elastomeric membrane for waterproofing building decks not subject to hydrostatic pressure. The specification applies only to a membrane system that has an integral wearing surface. This specification does not include specific requirements for skid resistance or fire retardance, although both may be important in specific uses.  
1.2 The type of membrane system described in this specification is used for pedestrian and vehicular traffic and in high-abrasion applications. The membrane may be single or multi-component, and may consist of one or more coats (for example base coat, top coat, etc.). The coat(s) may be built to the desired thickness in one or more applications. One coat (base coat) provides the primary waterproofing function and normally comprises the major amount of organic material in the membrane. The function of the top coat(s) is to resist wear and weather. Aggregate may be used as a component of the membrane system, as all or part of a course, to increase wear and skid resistance.  
1.3 The committee with jurisdiction over this standard is not aware of any comparable standards published by other organizations.  
1.4 Test methods in this specification require a minimum 0.5 mm [0.020 in.] base coat dry film thickness. Actual thickness required for a particular application and the use of aggregate in top coats shall be established by the membrane manufacturer.  
1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.  
1.6 The following safety hazards caveat pertains only to the test method portion, Section 5, of this specification: This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SIGNIFICANCE AND USE
5.1 This test method is designed to produce tensile property data for material specifications, research and development, quality assurance, and structural design and analysis. Factors that influence the tensile response and should be reported include the following: material, methods of material preparation and lay-up, specimen stacking sequence, specimen preparation, specimen conditioning, environment of testing, specimen alignment and gripping, speed of testing, time at temperature, and volume percent reinforcement. Properties, in the test direction, which may be obtained from this test method include the following:  
5.1.1 Ultimate tensile strength,  
5.1.2 Ultimate tensile strain,  
5.1.3 Tensile modulus of elasticity, and  
5.1.4 Poissons ratio.
SCOPE
1.1 This test method covers the determination of the tensile properties of metal matrix composites reinforced by continuous and discontinuous high-modulus fibers. Nontraditional metal matrix composites as stated in 1.1.6 also are covered in this test method. This test method applies to specimens loaded in a uniaxial manner tested in laboratory air at either room temperature or elevated temperatures. The types of metal matrix composites covered are:  
1.1.1 Unidirectional laminates (all fibers aligned in a single direction) containing either continuous or discontinuous reinforcing fibers. Both longitudinal and transverse properties may be obtained.  
1.1.2 0°/90° balanced crossply laminates containing either continuous or discontinuous reinforcing fibers.  
1.1.3 Angleply laminates containing continuous reinforcing fibers, with layups that do not include 0° reinforcing fibers (that is, (±45)ns, (±30)ns, and so forth).  
1.1.4 Multidirectional laminates containing continuous reinforcing fibers, with layups including 0° reinforcing fibers (that is, (0/±45/90)ns quasi-isotropic laminates, (0/±30)ns laminates, and so forth).  
1.1.5 Laminates containing unoriented and random discontinuous fibers.  
1.1.6 Directionally solidified eutectic composites.  
1.2 The technical content of this standard has been stable since 1996 without significant objection from its stakeholders. As there is limited technical support for the maintenance of this standard, changes since that date have been limited to items required to retain consistency with other ASTM D30 Committee standards. The standard therefore should not be considered to include any significant changes in approach and practice since 1996. Future maintenance of the standard will only be in response to specific requests and performed only as technical support allows.  
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information purposes only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ABSTRACT
This specification covers permanent metal railing systems (such as guard, stair, and ramp-rail systems) and rails (such as hand, wall, grab, and transfer rails) for use in agricultural, assembly, commercial, educational, industrial, institutional, recreational, and residential buildings. Also covered in this specification are basic design requirements and considerations, and minimum criteria for load and deflections; however, it does not cover design criteria for specific field conditions. Railing systems and rails shall be manufactured with major structural components made of metal and secondary components made of metal, wood, plastics, or glass, and shall withstand forces that may potentially be exerted by building users. Tests for static loading and deflection shall be performed and shall conform to the requirements specified.
SIGNIFICANCE AND USE
5.1 Metal railing systems and rails for buildings usually are designed, manufactured, and installed to withstand forces potentially exerted by the building users.  
5.2 The metal railing systems and rails shall not be considered a part of the structural system of the building unless this is expressly provided for in the design.
SCOPE
1.1 This specification2 covers permanent metal railing systems (guard, stair, and ramp-rail systems) and rails (hand, wall, grab, and transfer rails) installed in and for agricultural, assembly, commercial, educational, industrial, institutional, recreational, and residential buildings. However, this standard does not cover metal railing systems installed in and for industrial, commercial, and other non-residential workplace occupancies where normally only adults will be present or have access, and for which guardrail or handrail requirements are specified by occupational safety and health safety regulations and standards. This standard does not cover ballasted railing systems.  
1.2 This specification is intended to be applied to permanent metal railing systems for buildings and to such railing systems and rails having major structural components made of metal, with their secondary components made of metal or other materials such as wood, plastics, and glass.  
1.3 This specification considers that today's and tomorrow's overall outlook is based on the health and safety of all potential users of buildings. The criteria incorporated in this specification provide for normal and anticipated building uses, but not for abuses for which the building and its components are not designed.  
1.4 This specification establishes basic minimum requirements and criteria that lead to satisfactory products under normal use conditions and does not give consideration to design criteria for specific field conditions, the establishment of which is the prerogative and responsibility of the designer, specification writer, and code agencies.  
1.5 Sources of supportive information are listed in the Reference section (1-28).3  
1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

IEC 61189-2-720:2024 provides a method to evaluate specific characteristics of circuit boards by measuring the capacitance between conductor traces and a ground plane and can be used for qualitative comparison of a test specimen to a reference board. This method is not intended for quantitative measurements and for assessment of conformity to a specification.

ABSTRACT
This specification covers chlorinated poly(vinyl chloride)(CPVC) Schedule 80 pipe fittings intended for use with Iron Pipe Size (IPS) outside-diameter plastic pipe. Materials shall be tested and shall conform to the requirements for materials, workmanship, dimensions, and burst pressure.
SCOPE
1.1 This specification covers chlorinated poly(vinyl chloride) (CPVC) Schedule 80 pipe fittings. Included are requirements for materials, workmanship, dimensions, and burst pressure.  
Note 1: The threaded CPVC fittings covered by this specification were covered previously in Specification F437.  
1.2 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this specification.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 The following safety hazards caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ABSTRACT
This specification covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. The pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation. All seamless and welded pipes shall be treated to control their microstructure. Tensile tests, impact tests, hydrostatic tests, and nondestructive electric tests shall be made in accordance to specified requirements.
SCOPE
1.1 This specification2 covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures and in other applications requiring notch toughness. Several grades of ferritic steel are included as listed in Table 1. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse effect on impact properties.  
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.  
Note 1: The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.”  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ABSTRACT
This specification covers poly(vinyl chloride) (PVC) pipe made in standard thermoplastic pipe dimension ratios and pressure rated for water. Poly(vinyl chloride) plastics used to make pipe meeting the requirements of this specification are categorized in two criteria: short-term strength tests, and long-term strength tests. The products covered by this specification are intended for use with the distribution of pressurized liquids only, which are chemically compatible with the piping materials. The material shall conform to the required wall thickness, sustained pressure, burst pressure, flattening, extrusion quality, and impact resistance. It shall be subject to an accelerated regression test.
SCOPE
1.1 This specification covers poly(vinyl chloride) (PVC) pipe made in standard thermoplastic pipe dimension ratios and pressure rated for water (see appendix). Included are criteria for classifying PVC plastic pipe materials and PVC plastic pipe, a system of nomenclature for PVC plastic pipe, and requirements and test methods for materials, workmanship, dimensions, sustained pressure, burst pressure, flattening, and extrusion quality. Methods of marking are also given.  
1.2 The products covered by this specification are intended for use with the distribution of pressurized liquids only, which are chemically compatible with the piping materials. Due to inherent hazards associated with testing components and systems with compressed air or other compressed gases, some manufacturers do not allow pneumatic testing of their products. Consult with specific product/component manufacturers for their specific testing procedures prior to pneumatic testing.
Note 1: Pressurized (compressed) air or other compressed gases contain large amounts of stored energy which present serious safety hazards should a system fail for any reason.
Note 2: This standard specifies dimensional, performance and test requirements for plumbing and fluid handling applications, but does not address venting of combustion gases.  
1.3 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 The following safety hazards caveat pertains only to the test methods portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. A specific precautionary statement is given in Note 9.
Note 3: CPVC plastic pipe (SDR-PR), which was formerly included in this specification, is now covered by Specification F442/F442M.  
Note 4: The sustained and burst pressure test requirements, and the pressure ratings in the appendix, are calculated from stress values obtained from tests made on pipe 4 in. (100 mm) and smaller. However, tests conducted on pipe as large as 24 in. (600 mm) in diameter have shown these stress values to be valid for larger diameter PVC pipe.  
Note 5: PVC pipe made to this specification is often belled for use as line pipe. For details of the solvent cement bell, see Specification D2672 and for details of belled elastomeric joints, see Specifications D3139 and D3212.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barrier...

SIGNIFICANCE AND USE
4.1 This guide establishes the minimum level of training required to provide awareness-level knowledge for personnel operating in and around the areas and operations listed in 1.1.  
4.2 This guide may be used by individuals and AHJs that wish to identify the minimum training standards for land-based personnel operating in and around these areas and operations.  
4.3 A person trained to this guide is considered to be aware of the hazards and risks associated with these areas and operations.  
4.4 A person trained solely to this guide is not considered a “searcher,” “rescuer,” or both.  
4.5 This guide may be used to augment other training for a searcher and/or rescuer.  
4.6 This guide by itself is not a training document. It is only an outline of some of the topics required for training or evaluating a searcher and/or rescuer, although it can be used to develop a training document or program.  
4.7 It is the responsibility of the AHJ to determine the depth or detail of training needed to meet its training requirements.  
4.8 Nothing in this guide precludes an AHJ from adding additional requirements.  
4.9 This guide does not stand alone but must be used with the referenced documents to provide the specific minimum training needed by a ground searcher and/or rescuer operating in these areas.  
4.10 This guide can be used as a reference for training of searchers, rescuers, or both.  
4.11 The information presented in the following sections is not in any particular order and does not represent a training sequence.  
4.12 It is the responsibility of the AHJ to determine the evaluation process to assess a person’s knowledge. This may be by written exam, oral exam, demonstration, or some other means specified by the AHJ.
SCOPE
1.1 This guide is intended for training those who normally work in natural environments solely subject to terrain and weather-related risks who may be asked to respond to, or who may encounter, the operations defined in 1.2.  
1.2 This guide identifies and describes hazardous situations and environments, and the associated risks affecting search and rescue personnel who may be working on or around the following:  
1.2.1 Land search;  
1.2.2 Land rescue;  
1.2.3 Structural collapse;  
1.2.4 Rope rescues;  
1.2.5 Confined spaces;  
1.2.6 Water, both still and moving; and  
1.2.7 Trench or excavation collapse.  
1.3 The knowledge conveyed in this guide is intended to enable search and rescue (SAR) personnel to recognize situations that may require skills or capabilities they have not been trained to perform. This understanding will allow them to seek more knowledgeable personnel to mitigate the hazard and perform such rescues or other activities required to complete their mission.  
1.4 This guide is not intended to suggest that all search and rescue personnel must have the training identified within it. However, wherever the authority having jurisdiction (AHJ) deems this training to be appropriate, this document can be used as a guide.  
1.5 The AHJ shall determine what level of training constitutes sufficient competence for search and rescue personnel to enter areas or carry out missions, which include the hazards described in this guide.  
1.6 This guide identifies some of the known disciplines of SAR and their associated hazards. It does not, however, attempt to list all hazards or risks of which a person must be aware to operate safely and effectively in and around any of the areas listed in 1.1.  
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on ...

SIGNIFICANCE AND USE
4.1 This guide establishes a minimum standard for training of SAR personnel who conduct operations in an alpine environment.  
4.1.1 Alpine Endorsed individuals are required to have, at a minimum, the knowledge, skills, and abilities pertaining to safe movement individually, or as a member of a team, in an alpine environment.  
4.1.2 Every person who is identified as Alpine Endorsed shall meet the requirements of this guide.  
4.1.3 Alpine Endorsed individuals shall be entitled to add the prefixes “Alpine Endorsed” and “Mountain Endorsed” to their current training levels.4  
4.2 This guide only establishes the minimum knowledge, skills, and abilities required for a person to operate in an alpine environment as a part of a larger team. No other skills are included or implied.  
4.3 An Alpine Endorsement indicates that a person is qualified to operate safely and effectively in the alpine environment in his or her normal area of operations.  
4.3.1 An Alpine Endorsement alone does not indicate that an individual possesses adequate field skills and knowledge to make mission-critical decisions.  
4.4 This guide is an outline of the topics required for training or evaluating an Alpine Endorsed individual, and may be used to assist in the development of a training document or program.  
4.5 This guide can be used to evaluate a document to determine if its content includes the topics necessary for training individuals to operate in the alpine environment. Likewise, this guide can be used to evaluate an existing training program to see if it meets the requirements in this guide.  
4.6 The knowledge, skills, and abilities presented in the following sections are not in any particular order and do not represent a training sequence.  
4.7 This guide does not stand alone and must be used with other ASTM standards to identify the knowledge, skills, and abilities needed to conduct search and/or rescue in the alpine environment.  
4.8 Though this guide establishes only mi...
SCOPE
1.1 This guide establishes the minimum training, including general and field knowledge, skills, and abilities, for search and rescue personnel who conduct operations in an alpine environment.  
1.2 An Alpine Endorsement is intended only for those individuals capable of operating in the extreme conditions of the alpine environment, at altitudes that are likely to have a negative impact on human physiology.  
1.2.1 Specifically, Alpine Endorsed individuals may, under qualified supervision, perform their normal duties safely and effectively in an alpine environment.  
1.2.2 In addition, Alpine Endorsed individuals may, under qualified supervision, perform their normal duties safely and effectively in mountainous terrain alone.  
1.3 An Alpine Endorsement alone is not sufficient to indicate that an individual has the knowledge, skills, and/or abilities to perform any specific duties, including search and rescue operations, other than those defined in this guide.  
1.4 This guide alone does not provide the minimum training requirements for performing operations in partially or fully collapsed structures, in or on water, in confined spaces, or underground (such as in caves, mines, and tunnels).  
1.5 An Alpine Endorsed individual may be a member of a Mountainous or Alpine Land Search Team or Task Force or Group, as defined in Classification F1993.  
1.6 Alpine Endorsed SAR personnel must work under qualified supervision as deemed appropriate by the Authority Having Jurisdiction (AHJ).  
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established i...

SIGNIFICANCE AND USE
5.1 Environmental (including workplace) samples obtained during the assessment or mitigation of lead hazards from buildings and related structures are analyzed to determine lead content in media of concern. This test method is intended for use with other ASTM standards (see 2.1) that address the collection and preparation of samples (airborne particulate, dusts by wipe and micro-vacuuming, dried paint chips, and soils) that are obtained during the assessment or mitigation of lead hazards. This test method may be used to analyze samples collected from various environments, such as workplaces, buildings, indoor or outdoor settings, construction sites, housing, and so on.  
5.2 This test method may also be used to analyze similar samples from other environments such as toxic characteristic extracts of waste sampled using Guide E1908, and soil and sludge as prepared for analysis using U.S. EPA SW-846 Test Method 1311 (5).  
5.3 This test method can be relied upon by laboratories seeking accreditation for lead analysis by means of GFAAS.
SCOPE
1.1 This test method covers the determination of lead (Pb) in airborne particulate, dust by wipe and micro-vacuuming, paint, and soil collected in and around buildings and related structures using graphite furnace atomic absorption spectrometry (GFAAS).  
1.2 This test method contains directions for sample analysis, as well as quality assurance (QA) and quality control (QC), and may be used for purposes of laboratory accreditation and certification.  
1.3 No detailed operating instructions are provided because of differences among various makes and models of suitable GFAAS instruments. Instead, the analyst shall follow the instructions provided by the manufacturer of the particular instrument.  
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4.1 Exception—The SI and inch-pound units shown for wipe and micro-vacuuming sampling data are to be individually regarded as standard for wipe and micro-vacuuming sampling data.  
1.5 This test method contains notes which are explanatory and not part of the mandatory requirements of this standard.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SIGNIFICANCE AND USE
5.1 The enterococci are indicators of the bacteriological quality for potable water, shellfish growing waters, ambient, and recreational waters. A direct relationship between swimming, associated gastroenteritis, and enterococci has been established through epidemiological studies and marine and fresh water bathing beaches. These studies have led to the development of criteria that can be used to establish bathing water standards based on established health-water quality relationships.  
5.2 Since small or large volumes of water or dilutions thereof, can be analyzed by the membrane filter technique, a wide range of levels of enterococci in water can be enumerated and detected.
SCOPE
1.1 This test method covers a membrane filter (MF) procedure for the detection and enumeration of the enterococci bacteria in water. The enterococci, which include Entero-coccus faecalis (E. faecalis), E. faecium, and their varieties are commonly found in the feces of humans and other warm-blooded animals. Although some strains are ubiquitous and not related to fecal pollution, enterococci in water are an indication of fecal pollution and the possible presence of enteric pathogens. These bacteria are found in water and wastewater in a wide range of densities. The detection limit is one colony forming unit (CFU)/volume filtered.  
1.2 This test method has been used successfully with temperate fresh and marine ambient waters, and wastewaters. It is the user’s responsibility to ensure the validity of this test method for waters of untested types.  
1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are included for information only and are not considered standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 9.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

IEC 63267-2-1:2024 defines a set of specified conditions for an enhanced macro bend of 50/125 µm, graded index multimode fibre optic connection that is maintained in order to satisfy the requirements of attenuation and return loss performance in a randomly mated pair of polished physically contacting (PC) fibres.
An encircled flux (EF) compliant launch condition in accordance with IEC 61300-1, at an operational wavelength of 850 nm, is used for determination of performance grades, based on lateral fibre core offset, numerical aperture (NA) mismatch, and fibre core diameter (CD) variation.
Fibre core angular offset is considered insignificant given the state-of-the-art and is excluded as a factor for attenuation estimation. Attenuation and return loss performance grades are defined in IEC 63267-1.

IEC 60335-2-124:2024 deals with the safety of dry ice blasting machines intended for commercial indoor or outdoor use for the hand-guided cleaning, decoating and stripping of surfaces. The blasting machines are either equipped with containers for storage of dry ice or produce dry ice internally. These machines are not equipped with a traction drive.
The following power systems are covered:
- mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances,
- battery-operated machines.
This standard does not apply to
- dry ice blasting machines with integrated generation of compressed air;
- dry ice blasting machines using other transport gases besides compressed air or nitrogen;
- dry ice blasting machines with nozzles being controlled by robotic arms;
- spray extraction machines for commercial use (IEC 60335-2-68);
- high pressure cleaners (IEC 60335-2-79);
- sand blasting equipment (abrasive blasting);
- hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series);
- machines designed for use in corrosive or explosive environments (dust, vapour or gas);
- machines designed for use in vehicles in non-ventilated environment;
- machines designed for use on board of ships or aircraft.

IEC TS 61934:2024 is available as IEC TS 61934:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC TS 61934:2024 is applicable to the off-line electrical measurement of partial discharges (PDs) that occur in electrical insulation systems (EISs) when stressed by repetitive voltage impulses generated from power electronics devices.
Typical applications are EISs belonging to apparatus driven by power electronics, such as motors, inductive reactors, wind turbine generators and the power electronics modules themselves.
NOTE Use of this document with specific products can require the application of additional procedures.
Excluded from the scope of this document are:
- methods based on optical or ultrasonic PD detection,
- fields of application for PD measurements when stressed by non-repetitive impulse voltages such as lightning impulse or switching impulses from switchgear.
This edition includes the following significant technical changes with respect to the previous edition:
a) background information on the progress being made in the field of power electronics including the introduction of wide band gap semiconductor devices has been added to the Introduction;
b) voltage impulse generators; the parameter values of the voltage impulse waveform have been modified to reflect application of wide band gap semiconductor devices.
c) PD detection methods; charge-based measurements are not described in this third edition nor are source-controlled gating techniques to suppress external noise.
d) Since the previous edition in 2011, there have been significant technical advances in this field as evidenced by several hundreds of publications. Consequently, the Bibliography in the 2011 edition has been deleted in this third edition.

IEC 61360-7:2024 specifies the new data dictionary (domain) "IEC 61360-7 - General items" including its generic concepts. The IEC 61360-7 data dictionary provides concepts (dictionary elements, e.g. classes, properties) intended for cross-domain use.
This document has the status of a horizontal publication in accordance with IEC Guide 108.
The IEC 61360-7 data dictionary is published in IEC CDD and is available at https://cdd.iec.ch.

ISO/IEC 14543-5-194:2024(E) specifies the remote access (RA) server-based application framework, device interaction model, flow process and interfaces, and message formats to achieve intelligent grouping, resource sharing and service collaboration among IGRS smart lock devices.
This document is applicable to smart lock devices with direct network connections or connections through an intermediary network to a server for security authentication. This server utilizes a method to minimize the possibility of unauthorized access to these smart locks, while maintaining seamless interoperability among users, smart lock devices and RA servers at home, office or other remote environments.

IEC TR 63463:2024 provides guidelines for the general procedure for performing life assessment for an HVDC converter station. Following this, a more detailed description of performance issues of the thyristor based HVDC systems is given and the life assessment measures of equipment and guidelines for accessing the techno-economic life of equipment are given. This document also deals with information for specification of refurbishing HVDC system and the testing of the refurbished and replaced equipment. Lastly, this document outlines environmental issues and regulatory issues involved in the life assessment and concludes with a financial analysis of the refurbishment options.

IEC 62841-4-5:2021 This document applies to grass shears with a maximum cutting width of 200 mm designed primarily for cutting grass.
This document does not apply to hedge trimmers.
Hedge trimmers are covered by IEC 62841-4-2.

IEC TS 62898-3-2:2024 provides technical requirements for the operation of energy management systems of microgrids. This document applies to utility-interconnected or islanded microgrids. This document describes specific recommendations for low-voltage (LV) and medium-voltage (MV) systems.
This document focuses on developing standards of energy management systems aimed for microgrids integrated in decentralized energy systems or public distribution grids. It concerns some particularities that are not totally covered by the existing conventional energy system. The microgrid energy management systems are being studied by various actors (utilities, manufacturers, and energy providers) on actual demonstration projects and application use case. The aims of this document are to make the state of the art of existing energy management systems used in actual microgrids projects, to classify the relevant functions which can be accomplished by microgrid energy management systems, and to recommend necessary technical requirements for energy management systems of future microgrids.
This document includes the following items:
• main performances of key components of microgrid: decentralized energy resources, energy storages and controllable loads),
• description of main functions and topological blocks of microgrid energy management systems (MEMS),
• specification of information exchange protocol between main function blocks, linked to microgrid monitoring and control systems (MMCS).
Main functions of MEMS:
• power and energy management among different resources within microgrid including active and reactive power flows with different time scales,
• power and energy forecasts of microgrid,
• energy balancing between upstream grid and microgrid energy resources according to power and energy forecast and upstream and local constraints,
• economic and environmental optimization,
• possible service capacities such as capacity market auctions and resiliency anticipation: new business models,
• data archiving, trending, reporting and evaluation of operation capacities in various operation modes.
MEMS can have some other additional functions according to microgrid size and actual application cases:
• tariff and market trading management,
• utility ancillary services such as frequency regulation, voltage regulation, power quality and reliability improvement, demand response possibilities, change of operation modes linked to MMCS.

IEC 63203-402-3:2024 specifies terms, a measurement protocol, and a test to evaluate the accuracy of wearables that measure heart rate with a photoplethysmography (PPG) sensor. While this document can be used to measure a variety of different devices claiming to report heart rate, care will be taken when testing in countries that differentiate between heart rate and pulse rate. This measurement protocol is not intended to evaluate medical devices associated with the IEC 60601 series or ISO 80601 series.

2021-01-12 TC provided the Annex ZA. CCMC requested the Enquriy assessment.
2021-01-11 JF: CCMC requested the CEN/TC to provide the Annex ZA which is needed in order to request an Enquiry assessment.

RTS/TSGC-0329521vh50

RTS/TSGC-0329523vh70

DEN/ERM-TGAERO-31-2

RTS/LI-00190-2

RTS/TSGS-0333127vf40

RTS/TSGR-0437114vf80

RTS/TSGC-0631130vf22

RTS/TSGR-0338473vf90

RTS/TSGR-0534229-3vf40

RTS/ITS-00190