EN 17902:2023
(Main)Furniture - Circularity - Evaluation method for dis/re-assembly capability
Furniture - Circularity - Evaluation method for dis/re-assembly capability
This document provides guidelines for one aspect of circular economy framework; disassembly and reassembly capability.
This document establishes a set of criteria on which to base an assessment of the ability to access and remove/replace/reassemble priority parts of products. The criteria provided are intended to be used when designing a product and are applicable to different designs, materials, or construction methods.
This document does not include requirements.
The document does not apply to disassembly operation for the sole purpose of separating the individual materials.
This document does not provide a method to evaluate the overall degree of circularity of furniture products. For this, additional complementary evaluation methods for other aspects are necessary.
Möbel - Zirkularität - Bewertungsmethode für die Demontier-/Remontierbarkeit
Dieses Dokument enthält Leitlinien für einen Aspekt im Rahmen der Kreislaufwirtschaft: die Demontierbarkeit und Remontierbarkeit.
Dieses Dokument legt eine Reihe von Kriterien fest, auf deren Grundlage die Zugänglichkeit und die Möglichkeit zum Ausbau/Ersatz/Remontage von vorrangigen Teilen von Produkten bewertet werden kann. Die angegebenen Kriterien sind für die Konstruktion eines Produkts vorgesehen und gelten für verschiedene Ausführungen, Werkstoffe oder Bauweisen.
Dieses Dokument enthält keine Anforderungen.
Das Dokument ist nicht anwendbar für Demontagearbeiten, die ausschließlich der Trennung der einzelnen Werkstoffe dienen.
Dieses Dokument enthält kein Verfahren zur Bewertung des Gesamtgrades der Zirkularität von Möbelprodukten. Hierfür sind zusätzliche, ergänzende Bewertungsverfahren für andere Aspekte erforderlich.
Ameublement - Circularité - Exigences et méthodes d'évaluation pour le démontage/remontage
Le présent document fournit aux fabricants d'ameublement des recommandations relatives aux critères à prendre en compte dans la conception d'un produit afin de maximiser sa capacité de démontage/remontage, et de prolonger ainsi sa durée de vie ou celle de ses parties.
Il ne contient pas d'exigence sur les différents types de mobilier ou sur l'utilisation finale associée, mais offre une méthodologie qui peut être utilisée pour évaluer différentes conceptions, matériaux ou méthodes d'assemblage lors de la conception d'un produit.
Pohištvo - Krožnost - Metoda vrednotenja razstavljivosti in ponovne sestavljivosti
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17902:2024
01-februar-2024
Pohištvo - Krožnost - Metoda vrednotenja razstavljivosti in ponovne sestavljivosti
Furniture - Circularity - Evaluation method for dis/re-assembly capability
Möbel - Zirkularität - Anforderungen und Bewertungsmethoden für die
Demontage/Remontage
Ameublement - Circularité - Exigences et méthodes d'évaluation pour le
démontage/remontage
Ta slovenski standard je istoveten z: EN 17902:2023
ICS:
97.140 Pohištvo Furniture
SIST EN 17902:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17902:2024
---------------------- Page: 2 ----------------------
SIST EN 17902:2024
EN 17902
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2023
EUROPÄISCHE NORM
ICS 97.140
English Version
Furniture - Circularity - Evaluation method for dis/re-
assembly capability
Ameublement - Circularité - Exigences et méthodes Möbel - Zirkularität - Anforderungen und
d'évaluation pour le démontage/remontage Bewertungsmethoden für die Demontage/Remontage
This European Standard was approved by CEN on 20 November 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17902:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17902:2024
EN 17902:2023(E)
Contents Page
European foreword . 3
Introduction . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Priority part determination . 6
4.1 General principals . 6
4.2 Functions . 7
4.3 Surfaces and covers . 7
4.4 Procedure of priority part determination . 8
5 Criteria . 8
5.1 General . 8
5.2 Classes of criteria .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.