iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 63203-402-3:2024

(Main)

Wearable electronic devices and technologies - Part 402-3: Performance measurement of fitness wearables - Test methods for the determination of the accuracy of heart rate

Wearable electronic devices and technologies - Part 402-3: Performance measurement of fitness wearables - Test methods for the determination of the accuracy of heart rate

IEC 63203-402-3:2024 specifies terms, a measurement protocol, and a test to evaluate the accuracy of wearables that measure heart rate with a photoplethysmography (PPG) sensor. While this document can be used to measure a variety of different devices claiming to report heart rate, care will be taken when testing in countries that differentiate between heart rate and pulse rate. This measurement protocol is not intended to evaluate medical devices associated with the IEC 60601 series or ISO 80601 series.

Technologies et dispositifs électroniques prêts-à-porter - Partie 402-3: Mesurage de l'aptitude à la fonction des dispositifs prêts-à-porter pour les activités de mise en forme - Méthodes d'essai pour déterminer l'exactitude des mesures de la fréquence cardiaque

L'IEC 63203-402-3:2024 spécifie la terminologie, un protocole de mesure et un essai pour évaluer l'exactitude des technologies et dispositifs électroniques qui mesurent la fréquence cardiaque au moyen d'un capteur de photopléthysmogramme (PPG). Même si le présent document peut être utilisé pour mesurer une large gamme de dispositifs différents réputés capables de mesurer la fréquence cardiaque, une attention particulière sera accordée lors des essais effectués dans les pays qui distinguent la fréquence cardiaque et le débit cardiaque. Ce protocole de mesure n'a pas pour objet d'évaluer les appareils médicaux couverts par la série IEC 60601 ou la série ISO 80601.

General Information

Status
Published
Publication Date
08-Jan-2024
ICS
31.020 - Electronic components in general
Technical Committee
TC 124 - Wearable electronic devices and technologies
Drafting Committee
WG 4 - TC 124/WG 4
Current Stage
PPUB - Publication issued
Start Date
12-Jan-2024
Completion Date
09-Jan-2024
Ref Project

Buy Standard

IEC 63203-402-3:2024 - Wearable electronic devices and technologies - Part 402-3: Performance measurement of fitness wearables - Test methods for the determination of the accuracy of heart rate Released:9. 01. 2024IEC 63203-402-3:2024 - Wearable electronic devices and technologies - Part 402-3: Performance measurement of fitness wearables - Test methods for the determination of the accuracy of heart rate Released:9. 01. 2024
PreviousNext
Standard
IEC 63203-402-3:2024 - Wearable electronic devices and technologies - Part 402-3: Performance measurement of fitness wearables - Test methods for the determination of the accuracy of heart rate Released:9. 01. 2024
English and French language
34 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 63203-402-3
®

Edition 1.0 2024-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside


Wearable electronic devices and technologies –
Part 402-3: Performance measurement of fitness wearables – Test methods for
the determination of the accuracy of heart rate

Technologies et dispositifs électroniques prêts-à-porter –
Partie 402-3: Mesurage de l'aptitude à la fonction des dispositifs prêts-à-porter
pour les activités de mise en forme – Méthodes d'essai pour déterminer
l'exactitude des mesures de la fréquence cardiaque
IEC 63203-402-3:2024-01(en-fr)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2024 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 500 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 25 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc


If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.


A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC -  IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur les adapté à vos besoins.
projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au monde,
Restez informé sur les nouvelles publications IEC. Just
avec plus de 22 500 articles terminologiques en anglais et en
Published détaille les nouvelles publications parues.
français, ainsi que les termes équivalen
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 63203-401-1:2023(Main)
Wearable electronic devices and technologies - Part 401-1: Devices and systems: functional elements - Evaluation method of the stretchable resistive strain sensor

IEC 63203-401-1:2023 specifies a measurement method of tensile strain for stretchable, resistive strain sensors. This document describes characterization procedures for evaluation of the gauge factor, linearity, response characteristics, and hysteresis of unimodal tension sensors but is not appropriate for assessment of the physical properties of the sensor material such as the elastic modulus, elastic limit, and Poisson's ratio.

  • Standard
    44 pages
    English and French language
    sale 15% off
IEC
IEC 63203-402-1:2022(Main)
Wearable electronic devices and technologies - Part 402-1: Performance measurement of fitness wearables - Test methods of glove-type motion sensors for measuring finger movements

IEC 63203-402-1:2022 specifies test methods for wearable glove-type motion sensors to measure finger movements. The measurement methods include goniometric parameters related to the finger postures and flexion dynamics. Glove-type motion sensors are the type of gloves considered within the scope of this document for testing and measurement. This document describes direct and indirect measurement methods. In the direct measurement method, the angles of the joints of each finger are directly measured by a goniometer. The indirect method uses a measurement device such as a servomotor-based angle-measuring device. This document is applicable to angle measurement of all gloves with glove-type motion sensors without limitation of the device technology or size.

  • Standard
    29 pages
    English and French language
    sale 15% off
IEC
IEC 63203-406-1:2021(Main)
Wearable electronic devices and technologies - Part 406-1: Test method for measuring surface temperature of wrist-worn wearable electronic devices while in contact with human skin

IEC 63203-406-1:2021 defines the terms, definitions, symbols, configurations, and test methods to be used to specify the standard measurement conditions and methods for determining the contact-surface temperature of wrist-worn wearable electronic devices intended to be worn directly on a human wrist and that can be worn continuously during use. The conditions of the test do not consider perfusion and results are therefore considered conservatively. The temperature increase is induced by the thermal energy of wearable electronic devices during operation. This document gives the general procedure for the test method applicable to various wrist-worn wearable electronic devices for use by ordinary persons which in the context of this document is a healthy human adult.

  • Standard
    29 pages
    English and French language
    sale 15% off
IEC
IEC 61360-7:2024(Main)
Standard data element types with associated classification scheme - Part 7: Data dictionary of cross-domain concepts

IEC 61360-7:2024 specifies the new data dictionary (domain) "IEC 61360-7 - General items" including its generic concepts. The IEC 61360-7 data dictionary provides concepts (dictionary elements, e.g. classes, properties) intended for cross-domain use.
This document has the status of a horizontal publication in accordance with IEC Guide 108.
The IEC 61360-7 data dictionary is published in IEC CDD and is available at https://cdd.iec.ch.

  • Standard
    11 pages
    English language
    sale 15% off
IEC
IEC 60938-2-1:2023(Main)
Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required

IEC 60938-2-1:2023 is applicable to the drafting of detail specifications for fixed inductors for which safety tests are required for use in electronic equipment.
A blank detail specification is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements shall not be considered as being in accordance with IEC specifications nor shall they so be described.
This edition includes the following significant technical changes with respect to the previous edition:
a) it combines IEC 60938-2-1:1999 and IEC 60938-2-2:1999 into one Blank detail specification (BDS);
b) test schedule for quality conformance inspection is moved to an informative annex (Annex B).

  • Standard
    34 pages
    English and French language
    sale 15% off
IEC
IEC 63203-401-1:2023(Main)
Wearable electronic devices and technologies - Part 401-1: Devices and systems: functional elements - Evaluation method of the stretchable resistive strain sensor

IEC 63203-401-1:2023 specifies a measurement method of tensile strain for stretchable, resistive strain sensors. This document describes characterization procedures for evaluation of the gauge factor, linearity, response characteristics, and hysteresis of unimodal tension sensors but is not appropriate for assessment of the physical properties of the sensor material such as the elastic modulus, elastic limit, and Poisson's ratio.

  • Standard
    44 pages
    English and French language
    sale 15% off
IEC
IEC 60286-2:2022(Main)
Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes

IEC 60286-2:2022 applies to the tape packaging of components with two or more unidirectional leads for use in electronic equipment. It provides dimensions and tolerances necessary to tape components with unidirectional leads. In general, the tape is applied to the component leads.
It covers requirements for taping techniques used with equipment for automatic handling, pre-forming of leads, insertion and other operations and includes only those dimensions which are essential to the taping of components intended for the above-mentioned purposes.
This edition includes the following significant technical changes with respect to the previous edition:
a) complete revision of structure;
b) consolidation of essential parameters and requirements in Clause 4.

  • Standard
    70 pages
    English and French language
    sale 15% off
IEC
IEC 60286-3:2022(Main)
Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes

IEC 60286-3:2022 is applicable to the tape packaging of electronic components without leads or with lead stumps, intended to be connected to electronic circuits. It includes only those dimensions that are essential for the taping of components intended for the above-mentioned purposes. This document also includes requirements related to the packaging of singulated die products including bare die and bumped die (flip chips). This edition includes the following significant technical changes with respect to the previous edition:  
addition terms and definitions.
addition of a table of the classification to symbols concerning drive hole diameter and distance between the reel hole centre and the drive hole centre;
addition of drive hole to the reel (optional);
revision of reel hole diameter tolerances;
revision of 72 mm tape size carrier tape width dimension tolerances;
addition of Annex B (informative);
addition of component size 0201M.

  • Standard
    170 pages
    English language
    sale 15% off
IEC
IEC 63203-402-1:2022(Main)
Wearable electronic devices and technologies - Part 402-1: Performance measurement of fitness wearables - Test methods of glove-type motion sensors for measuring finger movements

IEC 63203-402-1:2022 specifies test methods for wearable glove-type motion sensors to measure finger movements. The measurement methods include goniometric parameters related to the finger postures and flexion dynamics. Glove-type motion sensors are the type of gloves considered within the scope of this document for testing and measurement. This document describes direct and indirect measurement methods. In the direct measurement method, the angles of the joints of each finger are directly measured by a goniometer. The indirect method uses a measurement device such as a servomotor-based angle-measuring device. This document is applicable to angle measurement of all gloves with glove-type motion sensors without limitation of the device technology or size.

  • Standard
    29 pages
    English and French language
    sale 15% off
IEC
IEC TR 62899-550-1:2022(Main)
Printed electronics - Part 550-1 : Quality assessment - Framework document on durability testing - Mechanical and thermal testing

IEC TR 62899-550-1:2022(E), which is a Technical Report, provides a framework for evaluating the mechanical and thermal durability of printed and/or flexible electronics components and products. This includes the bending test, torsion test, stretching test, steady heat test as well as the thermal cycle test. These are typical conditions that are easily encountered in daily life for printed and/or flexible electronics components and products.
This document gives guidance for use for technical committees in the preparation of consistent standards relating to the quality assessment of printed and/or flexible electronics components and products. Consistent standards for durability testing will help users, including businesses, developers, vendors, and end users to select suitable methods for durability testing and make consistent test procedures for printed electronics.

  • Technical report
    13 pages
    English language
    sale 15% off