Sanitary tapware - Electronic opening and closing sanitary tapware

The purpose of this document is to define requirements for marking, identification, leaktightness, electrical and operational safety and mechanical resistance for sanitary tapware with opening and closing controlled electronically.
The conditions of use for the supply system type are specified in Table 2:
[Table 2]
Annex B lists possible consequences of using a product outside its recommended operating range.
[Figure 1]
[Figure 2]
A vented domestic hot water and cold water supply system incorporating gravity hot water, mains cold water and alternative gravity cold water supply to sanitary appliances.

Sanitärarmaturen - Sanitärarmaturen mit elektronischer Öffnungs- und Schließfunktion

Dieses Dokument legt die Anforderungen an die Kennzeichnung, Identifizierung, Dichtheit, elektrische Sicherheit, Betriebssicherheit und mechanische Festigkeit von Sanitärarmaturen mit elektronisch geregelter Öffnungs- und Schließfunktion fest.
Die Einsatzbedingungen für die Wasserversorgungssysteme sind in Tabelle 2 festgelegt:
[Tabelle 2]
Anhang B führt mögliche Auswirkungen für den Fall auf, dass ein Produkt außerhalb seines empfohlenen Betriebsbereiches verwendet wird.
[Bild 1]
[Bild 2]
Belüftetes Warm- und Kaltwasserversorgungssystem für den häuslichen Gebrauch, einschließlich Warmwasser durch Schwerkraftbetrieb, kaltes Leitungswasser und wahlweise Kaltwasseranschluss an sanitäre Anlagen im Schwerkraftbetrieb.

Robinetterie sanitaire - Robinet sanitaire à ouverture et fermeture électroniques

L’objectif du présent document est de définir les exigences de marquage, d’identification, d’étanchéité, de sécurité électrique et de fonctionnement et de résistance mécanique pour la robinetterie sanitaire à ouverture et fermeture électroniques.
Les conditions d’utilisation relatives au type de système d’alimentation sont spécifiées dans le Tableau 2.
[Tableau 2]
L’Annexe B indique les conséquences possibles en cas d’utilisation d’un produit en dehors du domaine de fonctionnement recommandé.
[Figure 1]
[Figure 2]
Système d’alimentation en eau chaude et froide domestique, relié à l’air libre, comportant de l’eau chaude gravitaire, de l’eau froide de distribution et de l’eau froide gravitaire pour les appareils sanitaires.

Sanitarne armature - Elektronsko odpiranje in zapiranje sanitarnih armatur

General Information

Status
Published
Public Enquiry End Date
30-May-2022
Publication Date
16-Apr-2024
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
09-Apr-2024
Due Date
14-Jun-2024
Completion Date
17-Apr-2024

Relations

Buy Standard

Standard
EN 15091:2024
English language
53 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 15091:2022
English language
51 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 15091:2024
01-junij-2024
Sanitarne armature - Elektronsko odpiranje in zapiranje sanitarnih armatur
Sanitary tapware - Electronic opening and closing sanitary tapware
Sanitärarmaturen - Sanitärarmaturen mit elektronischer Öffnungs- und Schließfunktion
Robinetterie sanitaire - Robinet sanitaire à ouverture et fermeture électroniques
Ta slovenski standard je istoveten z: EN 15091:2024
ICS:
91.140.70 Sanitarne naprave Sanitary installations
SIST EN 15091:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 15091:2024

---------------------- Page: 2 ----------------------
SIST EN 15091:2024


EN 15091
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2024
EUROPÄISCHE NORM
ICS 91.140.70 Supersedes EN 15091:2013
English Version

Sanitary tapware - Electronic opening and closing sanitary
tapware
Robinetterie sanitaire - Robinet sanitaire à ouverture Sanitärarmaturen - Sanitärarmaturen mit
et fermeture électroniques elektronischer Öffnungs- und Schließfunktion
This European Standard was approved by CEN on 5 February 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15091:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 15091:2024
EN 15091:2024 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 10
3 Terms and definitions . 11
4 General requirements and testing . 11
4.1 Marking . 11
4.2 Identification . 11
4.3 Materials . 11
4.3.1 Chemical and hygienic requirements . 11
4.3.2 Exposed surface conditions . 11
4.4 Functions . 12
4.5 Backflow protection . 12
4.6 Electric characteristics and requirements . 12
4.6.1 General.
...

SLOVENSKI STANDARD
oSIST prEN 15091:2022
01-maj-2022
Sanitarne armature - Elektronsko odpiranje in zapiranje sanitarnih armatur
Sanitary tapware - Electronic opening and closing sanitary tapware
Sanitärarmaturen - Sanitärarmaturen mit elektronischer Öffnungs- und Schließfunktion
Robinetterie sanitaire - Robinet sanitaire à ouverture et fermeture électroniques
Ta slovenski standard je istoveten z: prEN 15091
ICS:
91.140.70 Sanitarne naprave Sanitary installations
oSIST prEN 15091:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 15091:2022

---------------------- Page: 2 ----------------------
oSIST prEN 15091:2022


DRAFT
EUROPEAN STANDARD
prEN 15091
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2022
ICS 91.140.70 Will supersede EN 15091:2013
English Version

Sanitary tapware - Electronic opening and closing sanitary
tapware
Robinetterie sanitaire - Robinet sanitaire à ouverture Sanitärarmaturen - Sanitärarmaturen mit
et fermeture électroniques elektronischer Öffnungs- und Schließfunktion
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 164.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15091:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 15091:2022
prEN 15091:2022 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 9
3 Terms and definitions . 10
4 General requirements and testing . 11
4.1 General. 11
4.2 Identification . 11
4.3 Materials . 11
4.3.1 Chemical and hygienic requirements . 11
4.3.2 Exposed surface conditions . 11
4.4 Functions . 11
4.5 Backflow protection .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.